Product information

Urethane Foam Tester

URETHANE FOAM TESTER
uft-5kn

• Deliver High Precision Measurement via 3 load cells even if there is unbalance load. The tester alone can meet a variety of specifications

such as JIS K6400-2, JASO B408 & etc.

• This UFT series can satisfy a variety of urethane foam test. The 3 load cells enable this tester to deliver high precision load detection even in the presence of unbalance load. Test sample placed on the wide test table (1000 x 700mm) can be measured just as it is. For instance a car seat can also be place on the test table and measurement can take place as it is. The installed urethane foam testing program can change “%”, “Cycle” and “Time”.

• The tester also meets the Hardness Test and Deflection Test Specifications of Automotive Manufacturer under fixed load.

• Test Conditions and Results can be stored in USB Memory and export to Microsoft Excel for Test Inspections. The tester also adopts “Program Load” via USB Memory and it can also meet requirements of any custom made test.

• External control test using PC Software is also possible.

TYPE OF TEST
  • Hardness Test JIS K6400-2 Method A, B, C & D
  • Compression Deflection Test JIS K6400-2 Method A-1 & A-2
  • Compression Deflection Test JIS K6400-2 Method B
  • Micro Displacement Spring Rate Test
  • Stress Relaxation Test
  • Compression Load Test
  • External Control Test via PC

 Download catalogue

SPECIFICATION
Model UFT-2KN UFT- 5KN
Maximum Load 2kN 5kN
Unit N, kN, kgf, lbf
Load Cells "3 load cells (Useful for unbalance load and precision measurement)"
Range Switch Over 4 Sub Range switch over manually or automatically
Load Range 200N 500N 1kN 2kN 500N 1kN 2kN 5kN
Resolution 0.001N 0.1N 0.1N 0.1N 0.1N 0.1N 0.1N 1N
Load Accuracy Reference to JIS B7721 Class 0.5 (± 0.5% of Applied Load)
Maximum Stroke 550mm
Length Resolution 0.1 or 0.01 mm via setting
Length Accuracy ± (0.05 + 0.0001 * L) mm where L is the arbitrary length
Test Speed 1~1000mm/min
Cross Head Control Precision ball screw and AC servo motor controlled
Standard Anvil Dia Universal Ball Joint ɸ 200mm anvil
Test Table Size 1000 x 700 mm
Move Key Function High Speed : 600 (mm/min) Step (Inching) 1 (mm)
Medium Speed : 60 (mm/min) Step (Inching) 0.1 (mm)
Low Speed : 6(mm/min) Step (Inching) Noting
Protective STOP Function STOP via Up/Down Limit Switches
STOP via range over
STOP via STOP key or Emergency STOP key
STOP via value set by testing software
Display LCD LCD with CCFL Backlingt
Backlight lifespan 25.000h Half-reduced brightness lifespan
Display Area W147 x H110mm
Display Resolution 640 x 480 dot
PC Software The tester alone can perform testing
MXR-01 (Urethane Foam testing mode)
Printer (Internal Printer) Thermal transfer dot printing
Print density 8 dot/mm
Effective print width 108mm
Print speed: 480 dot line/sec
Interface RS232C
Photocoupler insulated input / output + common.
Input 8 points output 8 points (judgment output)
Analog output : FORCE, DISTANCE
Power supply Single Phase AC 220~240V (50/60Hz)
Power Rating 300VA
Dimension W1115 x D750 x H1980mm
Weight Approx. 350kg