| 1 |
All models are 6-digit display, complies with 0.5 grade JIS B 7738. |
O |
O |
O |
O |
| 2 |
Set Length and find Load (Normal Testing). |
O |
O |
O |
O |
| 3 |
Set Load and find Length (Special Testing). |
X |
O |
O |
Manual |
| 4 |
Set Deflection and find Load (Special Testing). |
O |
O |
O |
Manual |
| 5 |
Set Load and find Deflection (Special Testing). |
X |
O |
O |
Manual |
| 6 |
N, mN, can be switched units (gf, kgf, (lb)). |
O |
O |
O |
O |
| 7 |
Length resolution is 0.01mm (○) and 0.001mm (1 micron) (◎). |
O |
O |
◎ |
O |
| 8 |
3-Step Testing through setting on Length. |
O |
O |
O |
Manual |
| 9 |
3-Step Testing through setting on Load. |
X |
O |
O |
Manual |
| 10 |
Multiple Step Testing for Load or Length with START, STEP & END input. |
X |
X |
O |
X |
| 11 |
Spring Rate, Free Length, Initial Tension for Tension Spring & Solid Height for Compression Spring. |
O |
O |
O |
O |
| 12 |
Peak Load for Disc (Flat) Spring |
O |
O |
O |
O |
| 13 |
Inching control of 1mm, 0.1mm, 0.01mm, (0.001mm for (◎). |
O |
O |
◎ |
Manual |
| 14 |
Store 50 setting conditions and can be recall for testing. |
O |
O |
O |
O |
| 15 |
Setting of tolerance and view with bar chart on screen to determine OK or NG. |
O |
O |
O |
O |
| 16 |
By ± key or the % key, there is an automatic calculation function of standards and tolerance. |
O |
O |
O |
O |
| 17 |
OK printing (Print only when Pass) and NG printing (Print only when Fail) and AUTO to print all results. |
O |
O |
O |
O |
| 18 |
When NG , there will be an * asterisk mark besides the results during printing. |
O |
O |
O |
O |
| 19 |
Dual units printing is possible (Example : N and kgf). |
O |
O |
O |
O |
| 20 |
Output Port to print through connecting to Mitutoyo Digimatic Caliper, Micrometers, etc on the dimension. |
O |
O |
O |
× |
| 21 |
Automatic Load Zero reset function can be set in the System. |
O |
O |
O |
O |
| 22 |
Test Speed of 1 ~ 600 / min. |
O |
O |
O |
Manual |
| 23 |
Interval Time 1 ~250Sec. |
O |
O |
O |
Manual |
| 24 |
Maintenance-free AC servo motor to the driving unit. |
O |
O |
O |
Manual |
| 25 |
High Performance Load Cell with 300% overload protection. |
O |
O |
O |
O |
| 26 |
Auto Origin function to compensate Deflection of Load Cell and also memorize into the tester. |
O |
O |
O |
O |
| 27 |
Auto High / Low Range Switch over changing the resolution |
O |
O |
O |
O |
| 28 |
Emergency Stop Button |
O |
O |
O |
O |
| 29 |
RS-232C Interface as standard accessories. |
O |
O |
O |
X |
| 30 |
Optional to add Bar Code Scanner to retrieve setting conditions |
O |
O |
O |
X |
| 31 |
Optional Software to run under Microsoft Windows Environment. |
O |
O |
O |
X |
